We starting video youtube channel. Now our customers have most easy way to watch how devices work, how works RGB led indicator ring and different relay modes. We sure this information will be useful for any customers which search for simple, reliable and good looks access control systems.
Sorry for temporary inconvenience. In the middle of May you must to see new site version.
ACS solution with this module will work with BLE key-fobs, phones and standard cards in same time. It’s must be very universal and usable solution for SOHO and...
LR-1C series have contact for door sensor -if you set controller in boss or security mode and door open without card – system start alarm signaling and indication. Alarm indication can be removed only by Boss card or Security card depend privious mode. Due small device size – cannot produce big sound volume. If you attach simple DC ALARM to alarm out you can receive very high volume level.
If MOQ enough – yes you can. But warranty terms and prices will be changed. We prefer to provide our Brand name.
You can use any type of card from this list:
13,56Mhz card support: MIFARE Ultra Light(10) / MIFARE Standard(S50, S70) / MIFARE Plus(P60) 125 kHz card support: EM 4001 / EM 4012 / T5557 / T5577 / HID ISOProx II / HID ProxCard II If you need work with special- your card format, we can made developing work by your order. With mifare or temic card, we can embed high security mode. This available like options
High Security Mode (*OPTION)
When controller work in high security mode it accept only own cards, which programmed before by user. After add card to controller this cards can’t be used with other controllers. No any other controllers can be read this card.
Keyfob its small remote control – like remote control for car alarm. Usually have up to 4 buttons. Each button have own code. Depend CPU inside, keyfob can work in open standard algorithm or in KEELOQ encryption algorithm. You can use this device like remote card – for any access control systems. Real distances of work depends on the environment.
Internal circuits develop for control up to 10A 12V in impulse and up to 2A 12V in constant. That enough for any lock type. In schematic used HEXFET® Power MOSFET 15A 12V.
Our readers implement the interface standard Wiegand 26 with parity as specified by the standard. If your controller does not have standard Wiegand interface 26 joint operation is not guaranteed. Modes of dynamic RGB indication, when working with third-party controller, must select by the jumper settings during installation.
You can use our LR-PRM. This module must be attach to our controller relay. On board this module have powerful relay AC 250V/10A, DC 30V/10A. With this module, you can control device with up to 2500 W electrical load.