We starting video youtube channel. Now our customers have most easy way to watch how devices work, how works RGB led indicator ring and different relay modes. We sure this information will be useful for any customers which search for simple, reliable and good looks access control systems.
Sorry for temporary inconvenience. In the middle of May you must to see new site version.
ACS solution with this module will work with BLE key-fobs, phones and standard cards in same time. It’s must be very universal and usable solution for SOHO and...
LRx-1RStandard access control proximity reader with RGB LumiRing indicator. Can work with any access control systems where controllers use Wiegand 26 interface for connect readers. With LR-1Cxx controller series can support full features Visual LumiRing menu.
The device is protected against static discharge and pulse over-voltages on all inputs and outputs.
The device is protected against polarity reversal on power connector. If during the installation of the terminal power is confused - the device will not be damaged.
The device is protected against 12 volt for all inputs and outputs. If during installation the wires are reversed - the device will not be damaged.
The device uses a specialized led module - LumiRing. It makes the usage of the device convernent and the change of the modes more easy and understandable.
All PCB boards in device are covered by special waterproof coat.
All components meet industrial standards. Wide voltage range: 9-24Volt. Wide temperature range:-30 +75C. Built-in Watchdog to prevent system from hanging.
The device is designed for strength and easy mounting with hidden security screws. It improves the security level of device.
Device uses a surface mounting method. There is no need to make big holes in your walls. It makes installation easy and fast.
|Model:||LRx-1R (LRE-1R:125kHz; LRM-1R:13,56Mhz)|
|Description:||Standard access control proximity reader with dynamic RGB LumiRing indicator|
|Indicator:||RGB light ring & Beeper|
|Visual themes:||4 stand-by, 4 reaction|
|Reader frequency:||125kHz or 13.56Mhz (option)|
|Reading range 125kHz:||6-12cm|
|Reading range 13.56MHz:||3-8cm|
|Read / Write 125kHz:||Read / Write|
|Read / Write 13.56MHz:||Read only|
|Supported Tage 125kHz:||EM 4001 / EM 4012 / HID ISOProx II / HID ProxCard II / TEMIC|
|Supported Tage 13.56MHz:||MIFARE Ultra Light(10)|
|MIFARE Standard(S50 / S70)|
|Power Consumption:||< 1W|
|Communication Interface:||Wiegand 26-34 bits / W-BUS|
|Wiring Distance:||100 m (22 AWG with shielded cable)|
|Housing Material:||ABS + PC|
|Color Standard:||Black / Gray / Ivory|
|Color Option:||Pearl White / Blue / Green / Yellow / Orange / Red|
|Operating Temperature:||-30℃ to +75℃|
|Protection Standard:||IP 56 / IP 65|
|STAND-BY INDICATION THEMES|
|1-2||OPEN||Theme 1 (default)|
|READER INTERFACE MODES|
|6-8||CLOSE||Wiegand 26 bit|
|7-8||CLOSE||Wiegand 34 bit|
|WORK INDICATION THEMES|
|9-10||OPEN||Theme 1 (default)|