We starting video youtube channel. Now our customers have most easy way to watch how devices work, how works RGB led indicator ring and different relay modes. We sure this information will be useful for any customers which search for simple, reliable and good looks access control systems.
Sorry for temporary inconvenience. In the middle of May you must to see new site version.
ACS solution with this module will work with BLE key-fobs, phones and standard cards in same time. It’s must be very universal and usable solution for SOHO and...
LRx-1RDStandard access control proximity reader with dynamic RGB LumiRing indicator and sensor doorbell button. Can work with any access control system where controllers use Wiegand 26 interface for connect readers. Doorbell function works only with LR-1Cxx controllers series. With LR-1Cxx controller series LRx-1RD can support full features Visual LumiRing menu.
In KIT with LR-1Cxx series device can implement touch-sensor doorbell button function. When user is touching to place of sensor - LR-1Cxx is making door ring signal.
The device is protected against static discharge and pulse over-voltages on all inputs and outputs.
The device is protected against polarity reversal on power connector. If during the installation of the terminal power is confused - the device will not be damaged.
The device is protected against 12 volt for all inputs and outputs. If during installation the wires are reversed - the device will not be damaged.
The device uses a specialized led module - LumiRing. It makes the usage of the device convernent and the change of the modes more easy and understandable.
All PCB boards in device are covered by special waterproof coat.
Device uses a surface mounting method. There is no need to make big holes in your walls. It makes installation easy and fast.
The device is designed for strength and easy mounting with hidden security screws. It improves the security level of device.
|Model:||LRx-1RD (LRE-1RD:125kHz; LRM-1RD:13,56Mhz)|
|Description:||Standard access control proximity reader with dynamic RGB LumiRing indicator and sensor doorbell button*|
|Indicator:||RGB light ring & Beeper|
|Visual theme:||4 stand-by, 4 reaction|
|Reader frequency:||125kHz or 13.56Mhz(option)|
|Reading range 125kHz:||6-12cm|
|Reading range 13.56MHz:||3-8cm|
|Read / Write 125kHz:||Read / Write|
|Read / Write 13.56MHz:||Read only|
|Supported Tage 125kHz:||EM 4001 / EM 4012 / HID ISOProx II / HID ProxCard II / TEMIC|
|Supported Tage 13.56MHz:||MIFARE Ultra Light(10)|
|MIFARE Standard(S50 / S70)|
|Power Consumption:||< 1W|
|Communication Interface:||Wiegand 26-34 bits / W-BUS|
|Wiring Distance:||100 m (22 AWG with shielded cable)|
|Housing Material:||ABS + PC|
|Color Standard:||Black / Gray / Ivory|
|Color Option:||Pearl White / Blue / Green / Yellow / Orange / Red|
|Operating Temperature:||-30℃ to +75℃|
|Protection Standard:||IP 56 / IP 65|
|STAND-BY INDICATION THEMES|
|1-2||OPEN||Theme 1 (default)|
|READER INTERFACE MODES|
|6-8||CLOSE||Wiegand 26 bit|
|7-8||CLOSE||Wiegand 34 bit|
|WORK INDICATION THEMES|
|9-10||OPEN||Theme 1 (default)|