We starting video youtube channel. Now our customers have most easy way to watch how devices work, how works RGB led indicator ring and different relay modes. We sure this information will be useful for any customers which search for simple, reliable and good looks access control systems.
Sorry for temporary inconvenience. In the middle of May you must to see new site version.
ACS solution with this module will work with BLE key-fobs, phones and standard cards in same time. It’s must be very universal and usable solution for SOHO and...
LRxH-1RThis device its Hybrid reader which unite standard proximity access control reader with radio reader-receiver for work with radio remote control 433 Mhz(868 Mhz) Standard Wiegand 26/34 interface can be used in any access control systems where controllers use Wiegand 26/34 interface for connect readers. With LR-1Cxx controller series can support full features Visual LumiRing menu.
Device works in dual mode with remote control keyfob 433mHz(868 Mhz) Keeloq ® code and 125Khz(13.56Mhz) rfid cards. User can use rfid smart-card and radio keyfob.
The device is protected against static discharge and pulse over-voltages on all inputs and outputs.
The device is protected against polarity reversal on power connector. If during the installation of the terminal power is confused - the device will not be damaged.
The device is protected against 12 volt for all inputs and outputs. If during installation the wires are reversed - the device will not be damaged.
The device uses a specialized led module - LumiRing. It makes the usage of the device convernent and the change of the modes more easy and understandable.
All PCB boards in device are covered by special waterproof coat.
All components meet industrial standards. Wide voltage range: 9-24Volt. Wide temperature range:-30 +75C. Built-in Watchdog to prevent system from hanging.
The device is designed for strength and easy mounting with hidden security screws. It improves the security level of device.
Device uses a surface mounting method. There is no need to make big holes in your walls. It makes installation easy and fast.
|Model:||LRxH-1R (LREH-1R:125kHz; LRMH-1R:13,56Mhz)|
|Description:||Hybrid access control reader. Can work with 433 Mhz(868 Mhz) remote controls and standard RFID cards or tags. Output Wiegand 26.|
|Indicator:||RGB light ring & Beeper|
|Indication theme:||4 stand-by, 4 reaction|
|Reader frequency:||125kHz or 13.56Mhz (option)|
|Radio module:||Integrated, superheterodyne, high reliability, reproducibility, interference proof|
|Transmission protection:||Keeloq ®, dynamic code|
|Modulation / frequency:||ASK / FSK 433,92 Mhz, ASK / FSK 868 MHz (option)|
|Antenna:||built in whip antenna|
|Reading range 433 MHz:||50 m (open space)|
|Reading range 125kHz:||6-12cm|
|Reading range 13.56MHz:||3-8cm|
|Read / Write 125kHz:||Read / Write|
|Read / Write 13.56MHz:||Read only|
|Read / Write 433MHz:||Read only|
|Supported Tage 125kHz:||EM 4001 / EM 4012 / HID ISOProx II / HID ProxCard II / TEMIC|
|Supported Tage 13.56MHz:||MIFARE Ultra Light(10)|
|MIFARE Standard(S50 / S70)|
|Power Consumption:||< 1W|
|Communication Interface:||Wiegand 26 - 34 bits / W-BUS|
|Wiring Distance:||100 m (22 AWG with shielded cable)|
|Housing Material:||ABS + PC|
|Color Standard:||Black / Gray / Ivory|
|Color Option:||Pearl White / Blue / Green / Yellow / Orange / Red|
|Operating Temperature:||-30℃ to +75℃|
|Protection Standard:||IP 56 / IP 65|
|STAND-BY INDICATION THEMES|
|1-2||OPEN||Theme 1 (default)|
|READER INTERFACE MODES|
|6-8||CLOSE||Wiegand 26 bit|
|7-8||CLOSE||Wiegand 34 bit|
|WORK INDICATION THEMES|
|9-10||OPEN||Theme 1 (default)|