• Lumiring
  • Lumiring
  • Lumiring
  • Lumiring

News
Start channel on Youtube.

We starting video youtube channel. Now our customers have most easy way to watch how devices work, how works RGB led indicator ring and different relay modes. We sure this information will be useful for any customers which search for simple, reliable and good looks access control systems.

2015.08.31
more...

Start rebuild site to new version.

Sorry for temporary inconvenience. In the middle of May you must to see new site version.

2015.04.13
more...

BLE 4.0 add-ons module.

ACS solution with this module will work with BLE key-fobs, phones and standard cards in same time. It’s must be very universal and usable solution for SOHO and...

2015.03.16
more...

Show more news

JOIN OUR NEWSLETTER

Here you can subsribe to the news-letter. To do this, enter your email.

Standalone system


SEND THIS PAGE

If you want to download data for this product enter your email and click send.

LRE-1CRSStandalone Access Controller with internal proximity reader embed dynamic RGB LED indicator with Lumiring visual menu system. On board socket for external reader. With this device, you can solve many different questions with organization simple access control system. Its can be two-way access control system – for this need buy additional reader in sample LRE-1R. Or simple one-way in pair with exit button LR-SBB. You can made installation on your own home, office, garage etc. Any entry where need simple access control system. Hardware setting of device can be controlled only by jumpers but all software setting user can change in any time by LumiRing menu.

2048 

Device can store up to 2048 full lenght code. Each code can have lenght 16 bit. This eliminates the possibility of code duplication. more...

STATIC PROTECTION

The device is protected against static discharge and pulse over-voltages on all inputs and outputs.

REVERSE POWER PROTECTION

The device is protected against polarity reversal on power connector. If during the installation of the terminal power is confused - the device will not be damaged.

POWER PROTECTION

The device is protected against 12 volt for all inputs and outputs. If during installation the wires are reversed - the device will not be damaged.

RGB ILLUMINATED RING

The device uses a specialized led module - LumiRing. It makes the usage of the device convernent and the change of the modes more easy and understandable. more...

WATER PROOF

All PCB boards in device are covered by special waterproof coat.

INDUSTRIAL GRADE

All components meet industrial standards. Wide voltage range: 9-24Volt. Wide temperature range:-30+75C. Built-in Watchdog to prevent system from hanging.

SECURITY SCREW

The device is designed for strength and easy mounting with hidden security screws. It improves the security level of device.

SAFE WALL MOUNT

Device uses a surface mounting method. There is no need to make big holes in your walls. It makes installation easy and fast.

 Model:  LRE-1CRS 
 Description:  Standalone Access  Controller with reader. DYNAMIC RGB LED indicator with  Lumiring visual menu system. Support any external reader by Wiegand 26/34. 
 Memory:  2048 codes (special version up to 15 000)
 Memory type:  EEPROM, non-volatile
 Critical event protection:  Watch Dog, Power On Reset
 Memory cell:  Conteins information about every tags or cards and its preferences
 Relay NC/NO:   1 (Control mode:Trigger, Pulse, Monostable)
 Relay operation time control:  1-255 seconds, 3 seconds default
 Relay Specification:   2A - continuous operation; 10A - pulse mode
 Door control input:  N/A
 Exit button input:  1 (Free/Card entry switching by long press - 10 seconds)
 Alarm out:  N/A
 Power supply:  9-24VDC
 Indicator:  RGB light ring & Beeper
 Visual themes:  4 stand-by, 4 reaction
 Reader frequency: 125kHz 
 Standard 125kHz:  EMMARINE 
 Reading range 125kHz:  6-12cm
 Read / Write 125kHz:  Read only
 Supported Tage 125kHz:   EM 4001 / EM 4012 
 Power Consumption:  < 1W
 Communication Interface:  Wiegand 26-34 bits / W-BUS
 Wiring Distance:  100 m (22 AWG with shielded cable)
 Housing Material:  ABS + PC
 Color Standard:  Black / Gray / Ivory
 Color Option:  Pearl White / Blue / Green / Yellow / Orange / Red
 Operating Temperature:  -30℃ to +75℃
 Protection Standard:  IP 56 / IP 65
 Dimensions(mm):  55(L)X55(W)X12(H)
 Weight(g):  40±5
USER cards:   ADD cards: YES 
 ERASE single card:  YES only if target card present
 ERASE ALL user cards:  YES
 BOSS cards:  ADD cards:  YES
 ERASE single card:  YES only if target card present
 ERASE ALL BOSS cards:  YES
 Security cards:  ADD cards:  YES
 ERASE single card:  YES only if target card present
 ERASE ALL security cards:  YES
 System settings:  Set stand-by visual theme:  YES, 4 themes  
 Set reaction visual theme:  YES, 4 themes  
 Set door open time:  YES, 1-255 seconds (default 3 seconds)
 Set auto-add mode:  YES, ON/OFF (default OFF)
 
RELAY WORK MODES
  SW Status Setting
1 OFF Trigger mode (default)  
2
1 ON Bistable mode  
2 OFF
1 OFF Monostable mode  
2 ON
1 ON RESERVED
2
HARDWARE RESET
6 OFF Work mode (default)
6 ON Hardware reset
READER INTERFACE SETTINGS
3 OFF W-BUS (default)
3 ON Wiegand 26-34 (AUTODETECT)
RELAY OUTPUT SETTINGS
4 OFF Normally open relay  (default)
4 ON Normally close relay
DOOR CONTROL SETTINGS (RESERVED)
      No control door (default)