We starting video youtube channel. Now our customers have most easy way to watch how devices work, how works RGB led indicator ring and different relay modes. We sure this information will be useful for any customers which search for simple, reliable and good looks access control systems.
Sorry for temporary inconvenience. In the middle of May you must to see new site version.
ACS solution with this module will work with BLE key-fobs, phones and standard cards in same time. It’s must be very universal and usable solution for SOHO and...
LRH-1CRStandalone Access Controller with radio remote control receiver-reader 433 Mhz(868Mhz option).This device can be used in any application where need universal and flexible solution for remote control system. Support up to 2048 codes. Support 3 types of relay control: Bistable, Monostable, Trigger. Realy time control: 1-255 sec.
With attached door sensor(options) device can control door open status.
Device can store up to 2048 full lenght code. Each code can have lenght 16 bit. This eliminates the possibility of code duplication.
The device is protected against static discharge and pulse over-voltages on all inputs and outputs.
The device is protected against polarity reversal on power connector. If during the installation of the terminal power is confused - the device will not be damaged.
The device is protected against 12 volt for all inputs and outputs. If during installation the wires are reversed - the device will not be damaged.
The device uses a specialized led module - LumiRing. It makes the usage of the device convernent and the change of the modes more easy and understandable.
All PCB boards in device are covered by special waterproof coat.
All components meet industrial standards. Wide voltage range: 9-24Volt. Wide temperature range:-30 +75C. Built-in Watchdog to prevent system from hanging.
The device is designed for strength and easy mounting with hidden security screws. It improves the security level of device.
Device uses a surface mounting method. There is no need to make big holes in your walls. It makes installation easy and fast.
|Description:||Standalone Access Controller with Keeloq ® code receiver-reader 433 Mhz(868Mhz option)|
|Relay NC/NO:||1 (Control mode:Trigger, Pulse, Monostable)|
|Relay operation time control:||1-255 seconds, 3 seconds default|
|Relay Specification:||2A - continuous operation; 10A - pulse mode|
|Door control input:||1 (Door not closed control, Breaking open control)|
|Exit button input:||1 (Free/Card entry switching by long press - 10 seconds)|
|Alarm out:||1 0,5A max|
|Indicator:||RGB light ring & Beeper|
|Indication theme:||3 stand-by, 3 reaction|
|Radio module:||Integrated, superheterodyne, high reliability, reproductibility, interference proof|
|Transmission:||Fixed code, Keeloq ® dynamic code|
|Modulation / frequency:||ASK / 433,92 MHz, ASK / 868 MHz (option)|
|Antenna:||built in whip antenna|
|Reading range 433 MHz:||50 m (open space)|
|Power Consumption:||< 1W|
|Housing Material:||ABS + PC|
|Color Standard:||Black / Gray / Ivory|
|Color Option:||Pearl White / Blue / Green / Yellow / Orange / Red|
|Operating Temperature:||-30℃ to +75℃|
|Protection Standard:||IP 56 / IP 65|
|RELAY WORK MODES|
|1-2||OPEN||Trigger mode (default)|
|4-6||OPEN||Work mode (default)|
|READER INTERFACE SETTINGS|
|RELAY OUTPUT SETTINGS|
|9-10||OPEN||Normally open relay (default)|
|9-10||CLOSE||Normally close relay|
|DOOR CONTROL SETTINGS|
|11-12||OPEN||No control door (default)|
|11-12||CLOSE||Control door sensor|