• Lumiring
  • Lumiring
  • Lumiring
  • Lumiring

News
Start channel on Youtube.

We starting video youtube channel. Now our customers have most easy way to watch how devices work, how works RGB led indicator ring and different relay modes. We sure this information will be useful for any customers which search for simple, reliable and good looks access control systems.

2015.08.31
more...

Start rebuild site to new version.

Sorry for temporary inconvenience. In the middle of May you must to see new site version.

2015.04.13
more...

BLE 4.0 add-ons module.

ACS solution with this module will work with BLE key-fobs, phones and standard cards in same time. It’s must be very universal and usable solution for SOHO and...

2015.03.16
more...

Show more news

JOIN OUR NEWSLETTER

Here you can subsribe to the news-letter. To do this, enter your email.

Standalone system


SEND THIS PAGE

If you want to download data for this product enter your email and click send.

LRxH-1CRStandalone Access Controller with internal RFID reader, radio remote control 433 Mhz(868 Mhz option) code receiver and socket for external reader. With this device you can make simple two way access control system which works with wireless cards or tags. It can be your own home, office, garage and etc. Any door where need control in both way. The functionality of this device is greatly extended by the use of radio module. The radio module is worked at 433Mhz(868 Mhz option) with radio remote control which use Keeloq ® code. The distance can reach 50 meters in open space. Now you can make simple hybrid access control system where you can use both type of identifitation method: for long distance 433Mhz(868 Mhz option) for close - 125Khz (13,56 Mhz option).  Hardware setting of device can be controlled only by jumpers but all software setting user can change in any time by LumiRing menu.

DUAL WORK MODE

Device works in dual mode with 433mHz(868 Mhz option) Keeloq code and 125Khz (13,56 Mhz option) rfid card. User can use rfid card, tag and remote control keyfob.

DOOR CONTROL

With attached door sensor(options) device can control door open status. more...

2048

Device can store up to 2048 full lenght code. Each code can have lenght 16 bit. This eliminates the possibility of code duplication. more...

STATIC PROTECTION

The device is protected against static discharge and pulse over-voltages on all inputs and outputs.

REVERSE POWER PROTECTION

The device is protected against polarity reversal on power connector. If during the installation of the terminal power is confused - the device will not be damaged.

POWER PROTECTION

The device is protected against 12 volt for all inputs and outputs. If during installation the wires are reversed - the device will not be damaged.

RGB ILLUMINATED RING

The device uses a specialized led module - LumiRing. It makes the usage of the device convernent and the change of the modes more easy and understandable. more...

WATER PROOF

All PCB boards in device are covered by special waterproof coat.

INDUSTRIAL GRADE

All components meet industrial standards. Wide voltage range: 9-24Volt. Wide temperature range:-30 +75C. Built-in Watchdog to prevent system from hanging. 

SECURITY SCREW

The device is designed for strength and easy mounting with hidden security screws. It improves the security level of device.

SAFE WALL MOUNT

Device uses a surface mounting method. There is no need to make big holes in your walls. It makes installation easy and fast.

 Model:  LRxH-1CR (LREH-1CR:125kHz; LRMH-1CR:13,56Mhz)
 Description:  Standalone Access Controller with internal RFID reader, radio remote control 433 Mhz(868 Mhz option) code receiver. Support any external reader by Wiegand 26 interface.
 Memory:  2048 codes (special version up to 15 000)
 Memory type:  EEPROM, non-volatile
 Critical event protection:  Watch Dog, Power On Reset
 Memory cell:  Conteins information about every tags or cards and its preferences
 Relay NC/NO:   1 (Control mode:Trigger, Pulse, Monostable)
 Relay operation time control:   1-255 seconds, 3 seconds default
 Relay Specification:   2A - continuous operation; 10A - pulse mode
 Door control input:  1 (Door not closed control, Breaking open control)
 Exit button input:  1 (Free/Card entry mode switching by long press - 10 seconds)
 Alarm out:  1 0,5A max
 Power supply:  9-24VDC
 Indicator:  RGB light ring & Beeper
 Visual theme:  4 stand-by, 4 reaction
 Reader frequency:  125kHz or 13.56Mhz(option)
 Standard 125kHz:  EMMARINE 
 Standard 13.56MHz:  ISO14443A
 Radio module:  Integrated, superheterodyne, high reliability, reproductibility, interference proof
 Transmission:  Fixed code, Keeloq ® dynamic code
 Modulation / frequency:  ASK / FSK 433,92 Mhz, ASK / FSK 868 MHz(option)
 Antenna impedance:  50
 Antenna:  built in whip antenna
 Reading range 433 MHz:  50 m (open space)
 Reading range 125kHz:  6-12cm
 Reading range 13.56MHz:  3-8cm
 Read / Write 125kHz:  Read / Write
 Read / Write 13.56MHz:  Read only
 Read / Write 433MHz:  Read only
 Supported Tage 125kHz:  EM 4001 / EM 4012 / HID ISOProx II / HID ProxCard II / TEMIC
 Supported Tage 13.56MHz:  MIFARE Ultra Light(10)
 MIFARE Standard(S50, S70)
 MIFARE Plus(P60)
 Power Consumption:  < 1W
 Communication Interface:  Wiegand 26-34 bits / W-BUS
 Wiring Distance:  100 m (22 AWG with shielded cable)
 Housing Material:  ABS + PC
 Color Standard:  Black / Gray / Ivory
 Color Option:  Pearl White / Blue / Green / Yellow / Orange / Red
 Operating Temperature:  -30℃ to +75℃
 Protection Standard:  IP 56 / IP65
 Dimensions(mm):  110(L)X55(W)X18(H)
 Weight(g):  40±5
USER cards:   ADD cards: YES 
 ERASE single card:  YES only if target card present
 ERASE ALL user cards:  YES
 BOSS cards:  ADD cards:  YES
 ERASE single card:  YES only if target card present
 ERASE ALL BOSS cards:  YES
 Security cards:  ADD cards:  YES
 ERASE single card:  YES only if target card present
 ERASE ALL security cards:  YES
 System settings:  Set stand-by visual theme:  YES, 4 themes  
 Set reaction visual theme:  YES, 4 themes
 Set door open time:  YES, 1-255 seconds (default 3 seconds)
 Set auto-learn mode:  YES, ON/OFF (default OFF)
 
RELAY WORK MODES
  Jumper Status Setting
1-2 OPEN Trigger mode (default)  
3-4
1-2 CLOSE Bistable mode  
3-4 OPEN
1-2 OPEN Monostable mode  
3-4 CLOSE
1-2 CLOSE RESERVED
3-4
HARDWARE RESET
4-6 OPEN Work mode (default)
4-6 CLOSE Hardware reset
READER INTERFACE SETTINGS
7-8 OPEN W-BUS (default)
7-8 CLOSE Wiegand 26-34
RELAY OUTPUT SETTINGS
9-10 OPEN Normally open relay  (default)
9-10 CLOSE Normally close relay
DOOR CONTROL SETTINGS
11-12 OPEN No control door (default)
11-12 CLOSE Control door sensor