Wireless Wiegand

WIRELESS-
WIEGAND

WIRELESS-WIEGAND

Access Control Wireless Gateway

WIEGAND AND OSDP

CHEAPER THAN TRENCHING

PLUG & PLAY MODE

TENS OF MILES AND MORE

NO DELAYS / NO PROBLEMS
NO WIRES

BANK GRADE ENCRYPTION

TRANSPARENT FOR ANY ACCESS CONTROL HARDWARE

No More Wires for Access Control Systems!

The Wireless Wiegand Access Control Extender, often referred to as a Wireless Wiegand Bridge, allows reader-controlled doors, gates, parking barriers, and connected devices to be installed without trenching or structural disruption.

It is commonly used in remote sites, historical buildings, retrofit environments, perimeter gates, parking systems, and construction projects where traditional cabling becomes costly or impractical.

The system consists of two units. One connects to the existing access controller, while the other connects to the door or gate hardware, including locks, relays, sensors, and gate operators. Together they create a secure 900+ MHz wireless link that behaves like a direct wired connection.

Wiegand, OSDP, relay control, REX, and door or gate sensor signals are transported transparently over long distances.

Each unit ships preconfigured and includes an embedded display and web interface for configuration, firmware updates, and diagnostics.

The platform is designed specifically for commercial access control and gate automation environments.

It is compatible with keypads and gate operators from brands such as LiftMaster, DoorKing, Linear, and similar commercial systems.

Product and company names mentioned are trademarks of their respective owners and do not imply affiliation or endorsement.

advantages

COST EFFECTIVE

Using our solution in access control systems allows for significant savings on cable works. In some cases, the economic impact can reach 80%.

CONSISTENT PERFORMANCE

Equally effective in open spaces, dense urban areas, and obstructed installations.

UNMATCHED RANGE

Tens of miles of secure, encrypted communication across any environment.

PLUG & PLAY

The solution enables fully transparent transmission of ACS signals without any additional ACS configuration required.

SUPERIOR PENITRATION

Equally effective in open spaces, dense urban areas, and obstructed installations.

NO LINE OF SIGHT REQUIRED

Operates reliably even without direct visibility between devices.

SECURE BY DESIGN

AES encryption and frequency-hopping provide strong protection against interference and attacks.

HOW IT WORKS

SPECIFICATION

For see the Specification table please rotate your device to landscape or Download PDF Datasheet

#	Parameter	Slave device	Master device
1	Voltage:	12 or 24 VDC operation The voltage at the outputs is determined by the power supply. 0.2A@12 VDC, 0.1 A @ 24 VDC current consumption ATTENTION: The Reader power is pass-through. If the device is powered with 24V, the readers will receive the same power.
2	Outputs:	Four (4) dry form “C” 1.5A rated relay outputs	Eight (8) outputs (dry contact) from 0 to 5 VDC
3	Inputs:	Eight (8) inputs (dry contact) from 0 to 5 VDC One (1) input (dry contact) 0 to 5 VDC for local emergency relay opening	Four(4) relay control inputs (dry contact) from 0 to 5 VDC
4	Communication interfaces:	• Wi-Fi 802.11 b/g/n 2.4 GHz • Two (2) Wiegand ports from 4 to 80 bits • RS-485 (OSDP) • USB ports (Type-C) for firmware update
5	Range:	Tens of miles or more (depending on environment and elevation)
6	Encryption:	AES 128
7	Dimensions (D x H):	5.9″ x 3.15″ x 1.38″ (150 x 80 x 35 mm) excluding antenna
8	Mounting method:	Wall mount/Din rail mount (option)
9	Weight:	5.36oz(152g)
10	Operation temperature:	Operation: 40°F ~ 149°F (-40°C ~ 65°C) Storage: -40°F ~ 158°F (-40°C ~ 70°C)
11	Relative humidity:	5-85 % RH without condensation
12	Ingress protection rating:	IP 20

Air Universal RFID/Bluetooth Reader	Air CR Wi-Fi Controller with built-in reader	Air CB Wi-Fi Controller with built-in exit button + Bluetooth reader
CPU 32-bit, 2×240 Mhz	CPU 32-bit, 2×240 Mhz	CPU 32-bit, 2×240 Mhz
Bluetooth support Bluetooth 4.1 / BLE	Bluetooth support Bluetooth 4.1 / BLE	Bluetooth support Bluetooth 4.1 / BLE
WiFi support 802.11 b/g/n 2.4GHz-2.5GHz (2400M-2483.5M)	WiFi support 802.11 b/g/n 2.4GHz-2.5GHz (2400M-2483.5M)	WiFi support 802.11 b/g/n 2.4GHz-2.5GHz (2400M-2483.5M)
Memory N/A	Memory 16 Mb	Memory 16 Mb
Reader frequency 13.56 MHz / 125 kHz	Reader frequency 13.56 MHz / 125 kHz	Reader frequency N/A
Supported tags MIFARE 13,56Mhz; NFC tags; EVM; EM-Marine, Bluetooth	Supported tags All MIFARE 13,56Mhz; NFCtags, EMVCo 3.0 support, M-Marine	Supported tags N/A
Support Phone NFC Pass YES	Support Phone NFC Pass YES	Support Phone NFC Pass NO
Wiegand port 1 Output	Wiegand port 1 Input / Output	Wiegand port 1 Input / Output
Cardholders N/A	Cardholders 10000 (Hardware limit)	Cardholders 10000 (Hardware limit)
Credentials/Physical Keys N/A	Credentials/Physical Keys 30000 (Hardware limit)	Credentials/Physical Keys 30000 (Hardware limit)
Lock N/A	Lock 1 (open collector)	Lock 1 (open collector)
Lock type N/A	Lock type NO, NC	Lock type NO, NC
More >	More >	More >

LRM-2RS RFID reader	LRM-2CRS Wireless Network Controller & Reader RFID	LRM-2CBS Wireless network controller & Touch exit button
CPU 32-bit, 80 Мгц	CPU 32-bit, 80 Мгц	CPU 32-bit, 80 Мгц
Bluetooth support No	Bluetooth support No	Bluetooth support No
WiFi support 802.11 b/g/n	WiFi support 802.11 b/g/n	WiFi support 802.11 b/g/n
Memory N/A	Memory 4 Mb	Memory 4 Mb
Reader frequency 13.56 MHz / 125 kHz	Reader frequency 13.56 MHz / 125 kHz	Reader frequency N/A
Supported tags MIFARE Classic 1K, 4K; MIFARE Classic EV1 1K, 4K	Supported tags MIFARE 13,56Mhz; NFC tags; EVM	Supported tags N/A
Support Phone NFC Pass No	Support Phone NFC Pass No	Support Phone NFC Pass NO
Wiegand port 1 Output	Wiegand port 1 Input / Output	Wiegand port 1 Input / Output
Cardholders N/A	Cardholders 3000	Cardholders 3000
Credentials/Physical Keys N/A	Credentials/Physical Keys 6000	Credentials/Physical Keys 6000
Lock N/A	Lock 1 (open collector)	Lock 1 (open collector)
Lock type N/A	Lock type NO, NC	Lock type NO, NC
More >	More >	More >

ICON Two-door access controller with wireless network	ICON PE Two-door access controller with wired and wireless network support. Power support POE	ICON MAX Four-door access controller with support for wireless and wired networks. Power support POE
CPU 32-bit, 2×240 Mhz	CPU 32-bit, 2×240 Mhz	CPU 32-bit, 2×240 Mhz
Bluetooth support Bluetooth 4.1 / BLE	Bluetooth support Bluetooth 4.1 / BLE	Bluetooth support Bluetooth 4.1 / BLE
WiFi support 802.11 b/g/n 2.4GHz-2.5GHz (2400M-2483.5M)	WiFi support 802.11 b/g/n 2.4GHz-2.5GHz (2400M-2483.5M)	WiFi support 802.11 b/g/n 2.4GHz-2.5GHz (2400M-2483.5M)
Memory 16 Mb	Memory 16 Mb	Memory 16 Mb+ 32 Gb
Protocol protection Symmetrical Encryption 256 bit	Protocol protection Symmetrical Encryption 256 bit	Protocol protection Symmetrical Encryption 256 bit
Cardholders 30 000	Cardholders 30 000	Cardholders 50 000
Power Outputs 1 Relay DRY / WET (Selectable) 3A 250VA 1 Open collector	Power Outputs 1 Relay DRY / WET (Selectable) 3A 250VA 1 Open collector	Power Outputs 4 Relay, DRY / WET (Selectable), 3A 250VAC
Inputs 4 (1xDoorsensor, 1xButton Exit, 1xAlarm In, 1xTamper)	Inputs 4 (1xDoorsensor, 1xButton Exit, 1xAlarm In, 1xTamper)	Inputs 12 (4xDoorsensor, 4xButton Exit, 1xAlarm In, 1xTamper, 2xAUX In)
Wiegand ports 2	Wiegand ports 2	Wiegand ports 4
More >	More >	More >

No More Wires for Access Control Systems!