Overview
Advantages
How it works
Specification
Get a Quote

No More Wires for Access Control, Gate Automation, and Building Systems!

Wireless Wiegand WW-G3 by LumiRing Inc. is a wireless bridge that replaces the cable run between an access control panel and any connected device — door, gate, parking barrier, relay, or sensor. No trenching, no conduit, no structural disruption. Also referred to as a Wireless Wiegand Bridge or Wireless Wiegand Extender.

The system uses two preconfigured units. One connects to the existing access controller. The other connects to the gate or door hardware — reader, lock, relay, REX, door contact, or gate operator. Together they create an encrypted 900 MHz radio link that behaves exactly like a direct wired connection. The access control system sees no difference.

Wiegand (4 to 80 bit), OSDP, RS-485, relay control, REX, and sensor signals all pass through transparently — no reprogramming, no software changes, no panel modifications required.

Each unit ships preconfigured with an embedded display and web interface for setup, diagnostics, and firmware updates.

Commonly deployed at perimeter gates, long driveways, remote sites, historical buildings, parking systems, multi-building campuses, and construction sites where running cable is expensive, impractical, or impossible. Planning a gate install without trenching? See how Wireless Wiegand eliminates the cable run between your panel and gate.

Compatible with controllers and gate operators from HID Mercury, Lenel, Brivo, Software House, Genetec, Honeywell, Bosch, ZKTeco, Suprema, Paxton, LiftMaster, DoorKing, Linear, and any system using Wiegand, OSDP, or RS-485.

Product and company names are trademarks of their respective owners and do not imply affiliation or endorsement.

For How-To videos and full documentation, visit wireless-wiegand.com

advantages

COST EFFECTIVE

Using our solution in access control systems allows for significant savings on cable works. In some cases, the economic impact can reach 80%.

CONSISTENT PERFORMANCE

Equally effective in open spaces, dense urban areas, and obstructed installations.

UNMATCHED RANGE

Tens of miles of secure, encrypted communication across any environment.

PLUG & PLAY

The solution enables fully transparent transmission of ACS signals without any additional ACS configuration required.

SUPERIOR PENETRATION

Penetrates concrete walls, steel structures, underground levels, and 20+ floors of reinforced building.

NO LINE OF SIGHT REQUIRED

Operates reliably even without direct visibility between devices.

SECURE BY DESIGN

AES encryption and frequency-hopping provide strong protection against interference and attacks.

HOW IT WORKS

SPECIFICATION

To view the specification table, please rotate your device to landscape or Download PDF Datasheet

#

Parameter

Slave device

Master device

1

Voltage:

12 or 24 VDC operation

The voltage at the outputs is determined by the power supply.
0.2A@12 VDC, 0.1 A @ 24 VDC current consumption


ATTENTION: The Reader power is pass-through. If the device is powered with 24V, the readers will receive the same power.

2

Outputs:

Four (4) dry form “C” 1.5A rated
relay outputs

Eight (8) outputs (dry contact) from
0 to 5 VDC

3

Inputs:

Eight (8) inputs (dry contact) from 0 to 5 VDC

One (1) input (dry contact) 0 to 5 VDC for local emergency relay opening

Four(4) relay control inputs (dry contact)
from 0 to 5 VDC

4

Communication
interfaces:

• Wi-Fi 802.11 b/g/n 2.4 GHz
• Two (2) Wiegand ports from 4 to 80 bits
• RS-485 (OSDP)
• USB ports (Type-C) for firmware update

5

Range:

Tens of miles or more (depending on environment and elevation)

6

Encryption:

AES 128

7

Dimensions (D x H):

5.9″ x 3.15″ x 1.38″ (150 x 80 x 35 mm) excluding antenna

8

Mounting method:

Wall mount/Din rail mount (option)

9

Weight:

5.36oz(152g)

10

Operation temperature:

Operation: 40°F ~ 149°F (-40°C ~ 65°C)

Storage: -40°F ~ 158°F (-40°C ~ 70°C)

11

Relative humidity:

5-85 % RH without condensation

12

Ingress protection
rating:

IP 20